Temperature- and frequency-dependent hysteresis scaling behaviour and phase transitions in a [001]c 0.73Pb(Mg1/3Nb2/3)O3-0.27PbTiO3 single crystal

The dielectric properties and bipolar polarization-electric field (P-E) and strain-electric field (S-E) dynamic hysteresis of a relaxor [001]_c 0.73Pb(Mg_1/3Nb_2/3)O₃-0.27PbTiO₃ (PMN-0.27PT) single crystal were investigated to reveal more details of the temperature-induced phase transitions. Different linear scaling relations for ferroelectric hysteresis area <A>, coercive field E_c, saturation polarization P_s and remnant polarization P_r versus temperature τ were measured in different temperature regions. For each measurement frequency f, all hysteresis parameters were found to decrease linearly with temperature in the temperature range of the single rhombohedral (R) phase or tetragonal (T) phase, and the rate of decrease in the T phase was observed to be much larger than the corresponding rate in the R phase. In the temperature range near the R-T phase transition, the exponent α in the power law <A>∝f ^α for the R phase was found to be smaller than that for the T phase, and the magnitude of α depended strongly on temperature when the crystal was in the R-T coexisting phase state. Our experimental and theoretical results indicate that the difference in the activation energy and dipole moment in the R and T phases may lead to the observed discrepancy for the P-E and S-E hysteresis behaviour in different temperature regions.     

Effects of ethylene-octene copolymer (POE) on the brittle to ductile transition of high-density polyethylene/POE blends

Three kinds of ethylene-octene copolymers (POE) were melt-blended with high-density polyethylene (PE-HD) in different proportions. Detailed characterizations were conducted to analyze their structural differences of POE and its effects in toughening PE-HD. The higher molecular weight POE can improve the toughness of PE-HD. 60:40 PE-HD/POE is elongated to break up to 700% while impact strength is 84.7 kJ/m² at −30°C, which is 21-fold of PE-HD. In the brittle to ductile transition (BDT) during impact, the fracture mechanism changes from the crazing mode to the shear yield-plastic deformation mode. The BDT temperature decreases as the POE molecular weight and its content increase. The interface strength in tension is estimated to access their effects. The Boltzmann-type models were successfully extended to describe the typical S-shaped curves in BDT of notched impact strength vs POE content or temperature. The supplementary decay model is suggested for the attenuation in toughening. Transition map in impact is proposed to select the use range of composition (c ) and temperature (T ) for high toughness. The curves are converted into 3D graph of T -c -impact strength for illustrating their coupling-separate effects, and further into the contour map of impact strength in T -c space for finding their partial equivalence.     

Role of Extracellular Vesicles in Epithelial Ovarian Cancer: A Systematic Review

Extracellular vesicles (EVs) are a heterogeneous group of cell-derived submicron vesicles released under physiological or pathological conditions. EVs mediate the cellular crosstalk, thus contributing to defining the tumor microenvironment, including in epithelial ovarian cancer (EOC). The available literature investigating the role of EVs in EOC has been reviewed following PRISMA guidelines, focusing on the role of EVs in early disease diagnosis, metastatic spread, and the development of chemoresistance in EOC. Data were identified from searches of Medline, Current Contents, PubMed, and from references in relevant articles from 2010 to 1 April 2020. The research yielded 194 results. Of these, a total of 36 papers, 9 reviews, and 27 original types of research were retained and analyzed. The literature findings demonstrate that a panel of EV-derived circulating miRNAs may be useful for early diagnosis of EOC. Furthermore, it appears clear that EVs are involved in mediating two crucial processes for metastatic and chemoresistance development: the epithelial–mesenchymal transition, and tumor escape from the immune system response. Further studies, more focused on in vivo evidence, are urgently needed to clarify the role of EV assessment in the clinical management of EOC patients.     

Fabrication,structural and dielectric property of lead-free perovskite silver niobate ceramics

Dielectric capacitors with high recoverable energy density are in high demand for their application in electrical and electronic systems. Among lead-free dielectric materials, silver niobate (AgNbO₃) has attracted growing interest due to its superior energy storage density at room temperature. The field-induced phase transition from antiferroelectric (AFE) phase to ferroelectric (FE) phase contributes to its large energy density. In this work, pure perovskite silver niobate ceramics were fabricated in an oxygen atmosphere by the solid-state reaction technique. The Pbcm orthorhombic phase of AgNbO₃ was closely observed using the Rietveld refinement method to provide explanation for the origin of high spontaneous polarization within a unit cell. Local structural analysis via piezoelectric force microscopy revealed the existence of ferroelectric nano domains, which may contribute to the high energy storage efficiency (η = 99.9926%) in AgNbO₃ at low electric fields. The phase transitions of AgNbO₃ were also investigated via the dependence of the dielectric permittivity (ε′ and ε″) and loss angle tangent (tanδ) on temperatures, providing insights into the further modification of AgNbO₃.     

基于云概率密度分布估计的大坝监测数据分析

大坝运行监测易受自然环境和监测条件影响，存在时间和空间上的变异性，监测数据具有不确定性。以云理论的随机性和不确定性分析方法为基础，并与空间数据辐射思想相结合，建立了云滴概率密度分布估计模型，然后导出云概率密度分布函数，依据样本监测数据推求母体空间数据的分布特征，并设计了基于逆向云算法云变换的计算程序。分析陆浑水库1979~1999年测压管监测数据和位移变形数据的云概率密度分布特征和云数字特征，得出了20 a来大坝的数据分布特征和运行状态。监测数据分析结果表明，云概率密度分布估计不仅能有效合理地分析大坝的运行状态，而且能够依据云数字特征来判断监测状态和监测环境的异常变化。      

Analytical curvature-continuous dual-Bézier corner transition for five-axis linear tool path

A novel analytical five-axis path-smoothing algorithm is developed for the high speed machining of a linear five-axis tool path. Segment junctions of the linear tool path in the machine tool coordinate system, which are tangent-discontinuous points, are all blended by two transition cubic Bézier curves. One cubic Bézier curve is used to smooth the segment junction of the translational path, and the other Bézier curve is used to smooth the segment junction of the rotational path. The tangency and curvature continuities are both guaranteed in the new path. The dual-Bézier transition algorithm has three advantages: (1) Compared with the path-smoothing method in the workpiece coordinate system, the new dual-Bézier transition method directly and simultaneously smooths the machine tool axis trajectories of both translational path and rotational path. The feed speed and stability will both be improved because the tool path discontinuities are the most important source of feed fluctuation. (2) The constraints of approximation error and the synchronization of parametrization of two smoothed curves, which are the most challenging problems in the smoothing of 5-axis tool path, are both considered. (3) The transition cubic Bézier curve pair has an analytical solution and can be easily integrated in the real-time interpolator. Computational examples and the cutting experiment of an impeller blade show that the novel path-smoothing method has obvious advantages in both feed smoothness and cutting efficiency over the original linear interpolator.     

Magneto-polaron induced intersubband optical transition in a wide band gap II–VI semiconductor quantum dot

Effects of LO-phonon contribution on the electronic and the optical properties are investigated in a Cd_0.8Zn_0.2Se/ZnSe quantum dot in the presence of magnetic field strength. The magneto-polaron induced hydrogenic binding energy as a function of dot radius in the wide band gap quantum dot is calculated. The oscillator strength and the spontaneous lifetime are studied taking into account the spatial confinement, magnetic field strength and the phonon contribution. Numerical calculations are carried out using variational formulism within the single band effective mass approximation. The optical properties are computed with the compact density matrix method. The magneto-polaron induced optical gain as a function of photon energy is observed. The results show that the optical telecommunication wavelength in the fiber optic communications can be achieved using CdSe/ZnSe semiconductors and it can be tuned with the proper applications of external perturbations.     

Automatic brain tissue segmentation in MR images using hybrid atlas forest based on confidence-weighted probability matrix

The segmentation of specific tissues in an MR brain image for quantitative analysis can assist the disease diagnosis and medical research. Therefore, a robust and accurate method for automatic segmentation is necessary. Atlas-based-method is a common and effective method of automatic segmentation where an atlas refers to a pair of image consist of an intensity image and its corresponding label image. Apart from the general multi-atlas-based methods, which propagate labels through the single atlas then fuse them, we proposed a hybrid atlas forest based on confidence-weighted probability matrix to consider the atlases set as a whole and treat each voxel differently. In the framework, we first register the atlas to the image space of target and calculate the confidence of voxels in the registered atlas. Then, a confidence-weighted probability matrix is generated and it augments to the intensity image of the atlas or target for providing spatial information of the target tissue. Third, a hybrid atlas forest is trained to gather the features and correlation information among the atlases in the dataset. Finally, the segmentation of the target tissues is predicted by the trained hybrid atlas forest. The segment performance and the components efficiency of the proposed method are evaluated on the two public datasets. Based on the experiment results and quantitative comparisons, our method can gather spatial information and correlation among the atlases to obtain an accurate segmentation.     

Bismuth doped PbZr0.70Ti0.30O3 ceramics and their properties driven by high temperature local polarity

Lead zirconate-titanate PbZr_0.70Ti_0.30O₃ ceramics doped with bismuth oxide has been investigated. Dielectric and optical measurements were performed to check the dopant influence on phase transitions and pre-transitional effects. It has been postulated that the temperature at which maximum permittivity occurs is not connected with structural phase transitions.